Description
Having these radius rod plates gives the ability to remove one rod at a time without having to remove the plate. This means there are no studs to break, ability to remove one rod at a time, stronger bolts, and ability to change the rear axle faster.
The race plates have a Nordlock washer on the bolts. This will keep the bolts from backing out and holding torque without having to use locktight. The strength and density of these threads is much stronger than a factory nut to ensure strong thread engagement over years of use.
This kit comes with a template to drill the holes for the mounting hardware of the plates. A 1/8″ pilot gets drilled first and then that hole gets opened up from 1/8″ to roughly 1/4″ or slightly larger hole. Everything needed is supplied except for the drill bits.
